Item: |
Vertical machining center |
Catalogue No.: |
13390 |
WWW: |
https://strojesvoboda.com/e13390 |
Model, parameters: |
VMC 1260 E CNC |
Producer: |
ZPS, a.s., Zlín |
Production Year: | |
Description: |
- working stroke:
- Axis x (work table) 1270 mm
- Y axis (cross support) 610 mm
- Z axis (headstock) 760 mm
distance:
- spindle face from table 150-190 mm
- Spindle axis from the 635 mm rack
- 910 mm floor worktop
feeds:
- Working feeds in X, Y, Z axes 0-8 m / min
- Programmable up to 20 m / min
- Rapid traverse on the X, Y, Z 20 mm axis
accuracy:
- Measuring system in the X, Y, Z axis indirect
- Measurement and evaluation according to VDI / DGQ 3441
- precision of X, Y, Z 0.010 mm axis positioning
- Repeated X, Y, Z 0.008 mm precision
- measurement and evaluation according to JIS B 6336 standard
- X, Y, Z + -0.003 mm positioning accuracy
- Repeated accuracy on the X, Y, Z + - 0.002 mm axis
desk:
- work area 1450x590 mm
- Number of T grooves x width 5x18 mm
- Medium groove dimension 18 H6 mm
- centering hole diameter dia. 30 H6 mm
- groove pitch 125 mm
- Max load 1350 kg
- Max workpiece dimensions at max tool length 300 mm 1016x590x300 mm
spindle:
- Speed range:
- Lower range 0-1250 rpm.
- Higher range 1251-5000 rpm.
- torque transmission with a two-stage planetary gearbox
- Spindle diameter in the front bearing 90 mm
- ISO 50 clamping tape
- electrical positioning
tool tray:
- tool holder 50-A / DIN 69 871-1
- clamping pin 50-A / DIN 69 872
- Number of tools in the magazine / machine 16/32
- exchange time - tool tool 8 s
- Searching the tool bidirectionally
- max tool diameter:
- when the tray is fully loaded, 130 mm
- 220 mm omitted
- max tool length 300 mm
- max. tool weight 8 kg
- Max. weight of all tools in one 108 kg container
Drives:
- spindle:
- Continuous output 18.5 kW
- Overload power (S6 - 30 min) 22 kW
- rated speed 1500 rpm.
- Maximum torque 208 Nm
- Maximum torque at overload 286 Nm
- feeds:
- Nominal torque in the X, Y axis 18.6 Nm
- Z-axis nominal torque 28.4 Nm
- nominal speed in the X, Y, Z axis 1500 rpm.
- axial force in the X axis, Y 10500 N
axial force in the Z axis 17500 N
lubricating aggregate:
- tank capacity 1.5 l
- pump:
- engine power 0,003 kW
- Rated speed of 3200 rpm.
- quantity delivered 0,005 l / 30 min.
coolant unit:
- volume (depending on the options used):
- 420 l tanks
- 150l chips
- 55 l chip conveyor
- 140 l filter units
- Tool cooling pump:
- engine power of 1.14 kW
- rated speed 3450 rpm.
- Delivery rate 50 l / min.
- pump for rinsing telescopic covers
- engine power 1.6 kW
- rated speed 3450 rpm.
- Delivery rate 100 l / min.
air device:
- Inlet air pressure 0.55-0.65 MPa
- Air consumption approx. 6 m3 / hour.
- the volume of oil in the 0.1 l air-lubrication tank
- volume of 0.3 l multiplier buffer tank
requirements for electricity.
- rated mains voltage 3x230 V / 60 Hz
- Operating power 27 kVA
- power installed 35 kW
- 100 A full load current
the ACRAMATIC A 2100 control system
additional information:
- Floor area of the machine 3200x2120 mm
- Ground plan area with open door 4730x2920 mm
- max. required floor area of the machine 44700x2920 mm
- hole width in the lids with 1110 mm open door
- Maximum working height of the machine 3450 mm
- machine weight (without coolant tank and chip conveyor) 8000 kg
- Weight of the coolant tank with pumps (without liquid) 210 kg
- Chip conveyor weight 260 kg
- the mass of 90 kg chips
- weight of the 80 kg filter unit
|
Status: |
READY to be shown RUNNING |
All offered items are our property, physically ON OUR STOCKS.
Type photos:
Machine photos:
|
Questionaire:
|